FAQ
FREQUENTLY ASKED QUESTIONS
An independently owned and operated licensee in the Leading network. Your contract is with that licensee, whose business name and ABN appear on your pre-inspection agreement, report and invoice. See How our network works.
A pre-purchase inspection gives you independent information about the visible condition of a property before you commit to buying it. It can help you decide whether to proceed, what to budget for and what to raise with the vendor.
Building inspections are carried out to Australian Standard AS 4349.1-2007 Inspection of buildings – Pre-purchase inspections – Residential buildings. Timber pest inspections are carried out to AS 4349.3-2010 Timber pest inspections. These standards set out what the inspector must inspect, the limits of the inspection and how findings are reported.
A visual inspection of the readily and safely accessible areas of:
- the interior and exterior of the building
- the roof exterior and roof space
- the subfloor space
- the site, generally within 30 m of the building and within the property boundaries, including garages, carports, sheds, small non-structural retaining walls, paths, driveways, steps, fencing and surface water drainage
The report identifies major defects and safety hazards, gives an overall assessment of minor defects, lists any areas not inspected and why, and recommends further investigation by a specialist where needed.
A pre-purchase inspection is not a guarantee that the property is free of defects. Unless agreed in writing, it does not include:
- areas that are concealed, obstructed, unsafe or not reasonably accessible on the day, including inside wall, floor and ceiling cavities
- testing or assessing electrical, plumbing, gas, drainage, hot water, heating, cooling, smoke alarms or appliances (these need a licensed tradesperson)
- footings below ground, concealed damp-proofing or structural design
- whether building work was approved or complies with the building regulations
- asbestos, mould or other hazardous materials testing
- swimming pool barriers (a separate inspection)
- an individual list of every minor defect, or repair costs
Your pre-inspection agreement sets out the full scope and limitations. Please read it before you sign.
Timber pest inspections are carried out only by inspectors holding the pest management licence their state requires. They are visual and non-invasive, and report on evidence of termites, wood borers and wood decay found at the time of inspection, plus conditions that make attack more likely. A timber pest inspection cannot confirm that timber pests are absent or won’t attack later, and it is not a treatment or termite management program. Regular follow-up inspections are recommended.
Inspectors in the network come from building and construction backgrounds and are trained in inspecting to AS 4349.1. Ask your inspector for their qualifications and any licence numbers before you book.
Yes. Every licensee must hold their own professional indemnity and public liability insurance. Professional indemnity insurance protects the inspector’s business if a claim is made against it. It is not insurance for you or the property, and it doesn’t guarantee the property is free of defects. Ask your inspector for a certificate of currency if you’d like one.
Yes. Arrive towards the end of the inspection, usually 45–60 minutes after the start time, so the inspector can work through the property first.
The written report is the record of the inspection. On-site comments are a preview only and may change once the inspector completes the report. If anything said on site matters to your decision, check it is in the report or ask your inspector to confirm it in writing.
Usually within 24 hours of the inspection, by email and SMS. Your agreed timing is in your pre-inspection agreement. Payment is due before the report is released.
No. The report is prepared for the client named in the pre-inspection agreement, for the purpose stated. Other people, including other buyers, lenders and agents, should not rely on it. If you are a buyer who has been given a vendor’s report, get your own inspection.
Most inspectors offer a combined price. Ask your local inspector for a quote.
Request a quote online or call 1800 532 346. Your enquiry goes to the licensee who services your area.
Inspectors in the network currently service [list only areas with an active licensee]. Enter your suburb in the quote form to check.
Many do. Availability depends on your local inspector.
Usually about an hour on site for a typical house, longer for larger or older properties, plus time to prepare the report.
Your inspector will arrange a time with the agent or vendor. Give us the agent’s details when you book.
Inspectors carry a ladder, torch and, where conditions call for it, a moisture meter, thermal imaging camera and laser level. These tools support a visual inspection. They do not see inside walls.
Yes. Please give at least 24 hours’ notice. A cancellation fee may apply to later cancellations, as set out in your pre-inspection agreement. Once the inspection has been carried out, the fee is payable.
Your rights under the Australian Consumer Law are not affected. Services must be provided with due care and skill. If you think your inspection didn’t meet that standard, contact your inspector first. If it isn’t resolved, see How our network works.
Your inspector. They inspected the property and wrote the report.
Approvals and occupancy or completion certificates are issued by your building surveyor or certifier, or your council, depending on your state. An inspection report does not replace them.
Approvals and occupancy or completion certificates are issued by your building surveyor or certifier, or your council, depending on your state. An inspection report does not replace them.